• D-TA-WH
  • D-006-wh1-rgb
  • D-006-wh2-rgb

006 Table A / White

Table for Tension Rod C, Tension Rod A(Vertical use only) or Tension Rod B (Vertical use only). This table can be attached on the tension rod. It is very easy to install at the height you like and book or cup can be placed on the table at hand. White color which can be coordinated anywhere.
* Indoor Use only
* For Tension Rod A, Tension Rod B or Tension Rod C only (Vertical use only)
*As natural wood is used, there are individual difference about the wood grain, knot, color and luster and so on.

006 Table A / White

SPEC
Size: W230mm (9.06 inch) H41mm (1617 inch) D280mm(11.02 inch)
Weight: 600g (1.32 lb)
Max. Withstand Weight 1kg / 2.2 lb
Material
Shelf Board: Plywood, Urethane Coating
Clasp: Steel / Epoxy Powder Coating
Resin Portion: EVA
Screw: Steel / Thin Coating
Attachment: Manual Instruction

HOW TO USE

【Installation Method】

At first, please definitely practice the followings.

Before inserting this product into the pipes, in order not to damage the pipes, loosen the Brass Screw until the Tip of the Brass Screw is gone by checking the inside of the Sleeve Tube by eye.


 

●In case of installing into the Inner Pipe

Before inserting the Table Board into Tension Rod, draw the Inner Pipe and insert the Table Board into the Inner Pipe with the right way up.

●In case of installing into the Outer Pipe

Before inserting into Tension Rod, remove the Upper End Cap attached to the Outer Pipe and insert the Table Board into the pipe and put the Upper End Cap on the Outer Pipe.


 

At last, please definitely practice the followings.

After installing Tension Rod, tighten the Brass Screw on the position & direction of the Table Board.