Reinforced Mesh Top Tension Shelf - Deep & Wide | Medium | RB-11
This is a heavy-load, deep and wide tension shelf with enhanced load-bearing capacity (max. load-bearing capacity 132.2lbs).
It is designed with a strong built-in spring mechanism that attaches securely to the wall without the need for screws or nails.
This shelf part can be extended and retracted to provide a large storage capacity.
It is perfect for use in closets, laundry rooms, and other large areas, and can also be used on stepped walls.
| Model No. | RB-11 |
| Size | Medium (29.6 - 47.3 in) |
| Necessary installable measurements | Width 29.6 - 47.3 in Full depth Approx. 13.2 in Height 3.6 in * Depth of part of shelf ：Approx. 12 in |
|
Load capacity |
Installing with 29.6 in … Up to 132.2lbs |
Material Indication
Pipes…Steel(Epoxy Resin Coating)
Resin parts…ABS Resin, Polypropylene Resin, Synthetic Rubber
Screws…Steel(Plating)
Large Storage Capacity
Utilizes Dead Space
Fits on Stepped Walls
Size Variation of this RB Series
Location for installation
・This product is for indoor use only.
・Install the product where the concrete walls, pillars and their walls and foundations are strong enough to withstand pressure produced by the shelf during the entire period of use.
・The product should not be installed on a slope, curved or uneven surface.
・Do not use the product in areas subject to high temperatures, direct sunlight, high humidity or direct contact with water, or outdoors or in bathrooms.
・Since the product presses strongly against the walls, marks may remain on the walls after the shelf is removed. Use the product where such marks will not lead to appearance problems.
*Excerpts from the instruction manual.
Precaution information
To ensure safe and proper use of this product, please read the instruction manual before use.
・Do not use this product to protect an individual or their property such as for use as a handrail or guard or for any purpose other than the intended use.
・Do not install this product above or near hazardous material such as chemicals, cutting tools or other items that could cause injury, combustion equipment, heating equipment, or above a place where people normally are located.
・Do not modify shelf.
・When installing and using the product, observe the following:
- Install horizontally (perpendicular to the wall) and not vertically.
- Install the product within the necessary installable measurements indicated above.
- Use the product within the indicated load capacity.
- When putting things on the shelf, apply a load that is evenly distributed.
- Avoid applying shock loads to the shelf such as pulling it down strongly, shaking it, or hanging from it.
- Check the installation condition of the product a few days after installation, and then weekly.
・Do not install the product above or near valuable or breakable objects, or above a faucet.
・The load capacity may decrease because of the magnitude of the pressure produced between the product and wall, installation length, wall material, and installation condition.
As a result, the indicated load capacity is not a guaranteed value but is shown here for reference only.
・We will not compensate for failures, damage, and injuries due to things such as natural disasters, deterioration, alteration, inappropriate use, or failure to follow these instructions.
*Excerpts from the instruction manual.
