Draw a Line | Table A | Vertical Mounting | Black
A Companion Piece for Draw a Line's Tension Rod.
Designed specifically for use with vertically mounted tension rods, Table A offers versatility and convenience.
Adjustable Mounting Position: Place the table in the most convenient location for you.
*For vertical installation only.
|Necessary installable measurements||Width 9.1 in
Depth 11.1 in
Height 1.6 in
|Up to 2.2lbs|
|Table size||9.1 in diameter / Thickness 0.4 in|
Table board…Plywood (Lacquer-finished)
Sleeve tube…Steel (Epoxy Resin Coating)
Screws…Brass, Steel, ABS Resin
Turn Your Wishes for a Convenient Table into Reality
Versatile and Decorative
Elegant Combination of Natural Wood and Steel
Select From Two Colors
Location for installation
・This product is only for indoor use. Do not use this product outside.
・Install this products where is not within person's reach who may damage and/or falling down the product such as children.
Enjoy the charm and appearance of the materials as they change and age.
・As natural wood is used, there are individual difference in the wood grain, knot, color and luster and so on.
・Brass parts are not plated but left in their original state, so the color will change over time.
・The steal surface are coated with a matt finish to give it a unique texture. The surface coating get scratched when some hard tip touch the surface.
・During installation, to fix the position by pushing screw into the pipes, a scratch will be made on the pipe.
Precautions for installation
To ensure safe and proper use of this product, please read the instruction manual before use. In case of calculating the load capacity for Tension Rod, please include the weight of this product as 1kg (2.2lbs).
・Do not use this product for any purpose other than the intended use described in these instructions.
・Do not disassemble or modify the product.
・Avoid putting stuffs beyond the indicated load capacity or applying shock loads. Doing so could result in the products physical damage and/or falling down.
・In case of pulling the product or clothes getting stuck with the product, it could cause the tension rod to fall and cause injury and/or damage the floor.
・Tighten the brass screws firmly and check whether the product could not be slipped down before use.
・Wipe off any dirt with a damp soft cloth and then wipe with a dry cloth.
・Water and oils can discolor or rust the product. In case of contact, immediately clean and remove these substances.
*Excerpts from the instruction manual.
In case of calculating the load capacity for Tension Rod, please include the weight of this product as 1kg (2.2lbs).